Creality LD-002R Resin 3D Printer

Creality LD-002R Resin 3D Printer

RM1,109.00

PRODUCT DESCRIPTION

BUILD AND MOTION: Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.

ANTI-ALIASING: MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.

QUICK LEVELING: Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.

PERFORATED PRINT PLATE: Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.

AIR FILTER: A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.

Product Specifications

  • Model: Creality LD002r
  • Print size: 120 x 65 x 165mm
  • Machine size: 221 x 221 x 430mm
  • XY axis position precision: 0.075mm
  • Screen size: 3.5 inch touch screen
  • Print speed: 20-30mm/h
  • Light source configuration: UV integrated lamp bead (wavelength 405nm)
  • Print method: USB flash driver
  • Layer thickness: 0.005mm-0.01mm
  • Molding technology: LCD
  • Machine Weight: 7kg
  • Rated power: 90W
  • Support material: 405nm photosensitive resin